The Work Sharp WSSAKO81113 Assorted Belt Kit review centers on a practical replacement set for owners of the Ken Onion Edition Work Sharp Knife & Tool Sharpener.
Its five grits cover a broad progression from extra coarse work to a fine finishing belt, with an important fit restriction to check before buying.
Work Sharp Belt Kit Review Summary
The quick verdict

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A varied replacement belt set for Ken Onion Edition sharpener owners who want coarse grinding, finer sharpening, and an extra fine finishing option.
- Includes one P120 extra coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra fine Micro-Mesh belt.
- X65 coarse is listed as equivalent to P220; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- The P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.
Pros
- Five distinct abrasives provide a broad grit progression in one set.
- The mix includes both coarse options and finer grades for refinement.
Consider before buying
- Compatibility is limited to the Ken Onion Edition WSKTS-KO; it does not fit other Work Sharp tools or accessories.
- There is one belt per grit, so the assortment may be less useful if you mainly need backups of a single grade.
Read the full review summary
This assortment includes one belt each at P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
That spread gives a Ken Onion Edition owner several abrasive grades in one kit, so it can support different stages of knife and tool sharpening without committing the whole purchase to a single grit.
The set is designed for the WSKTS-KO only, and its belts are not compatible with other Work Sharp tools or accessories.
The four standard belts measure 3/4 by 12 inches; the 6000 Micro-Mesh belt measures 1/2 by 12 inches. Confirm your sharpener model and belt dimensions before ordering.
The buying factors
Work Sharp Belt Kit Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Grit range
Five grades span extra coarse grinding through extra fine finishing.
Progression flexibility
One belt at each included grit supports multiple stages of a sharpening routine.
Model compatibility
The kit is restricted to the Ken Onion Edition WSKTS-KO.
Belt size clarity
Dimensions are specified, including the narrower 6000 belt.
Replacement usefulness
It offers an assortment rather than replenishing only one frequently used grit.
Specialized abrasive provenance
The engineered abrasives are made in the USA by Norton Abrasives for Work Sharp.
Key Features and Specifications of Work Sharp Belt Kit
- Includes one P120 extra coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra fine Micro-Mesh belt.
- X65 coarse is listed as equivalent to P220; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- The P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.
- Made as a direct replacement assortment for the Work Sharp Knife & Tool Sharpener Ken Onion Edition, model WSKTS-KO.
- The premium grade engineered abrasives are made in the USA by Norton Abrasives for Work Sharp and are designed for knife and tool sharpening and grinding.
Pros and Cons of Work Sharp Belt Kit
Pros
- Five distinct abrasives provide a broad grit progression in one set.
- The mix includes both coarse options and finer grades for refinement.
- Specific belt dimensions make it easier to check fit before purchase.
- Norton Abrasives manufacture the engineered belts for Work Sharp in the USA.
Consider before buying
- Compatibility is limited to the Ken Onion Edition WSKTS-KO; it does not fit other Work Sharp tools or accessories.
- There is one belt per grit, so the assortment may be less useful if you mainly need backups of a single grade.
- The 6000 Micro-Mesh belt is narrower than the other four, a dimension worth checking against your planned use.
Who Should Buy Work Sharp Belt Kit?
Good fit
Consider this kit if you own the WSKTS-KO and want a selection of replacement abrasives for different points in a sharpening or grinding routine.
The P120 and X65 grades give the assortment its coarser end, while X22, X4, and 6000 extend into finer work.
It is especially suitable when you would rather replenish several grades together than buy multiple single-grit kits.
Before ordering, compare the sharpener model and the stated belt sizes with your current setup; the last belt is 1/2 inch wide rather than 3/4 inch.
Who should skip it
Skip this assortment if your Work Sharp tool is not the Ken Onion Edition WSKTS-KO. The stated fit is specific, and the belts are not described as compatible with other Work Sharp tools or accessories.
Choose a single-grit replacement option if your routine calls for several belts of one particular grade rather than one belt in each of five grades.
How the Work Sharp Belt Kit fits a sharpening routine
A useful spread from coarse to fine
The defining advantage is breadth: the assortment moves from P120 extra coarse and X65 coarse through X22 medium and X4 fine, then adds a 6000 extra fine belt.
That gives buyers several grades to choose from as a task changes, though the description does not prescribe a particular sequence or result for any blade.
Check the model and belt width
Compatibility is the key buying check. The kit is a direct replacement assortment for the Ken Onion Edition WSKTS-KO and is specified not to fit other Work Sharp tools or accessories.
Four belts are 3/4 by 12 inches, while the 6000 belt is 1/2 by 12 inches, so verify both model and dimensions before purchase.
Assortment versus replenishment
One belt at each grade favors variety over depth.
This suits an owner who wants several abrasive choices on hand, but someone who repeatedly uses just X4 or X22 may get a more targeted restock from a dedicated grit kit.
The best fit depends on which grades your work consumes most often.
Purpose-built abrasive supply
The engineered abrasives are made by Norton Abrasives for Work Sharp and intended for knife and tool sharpening and grinding.
The stated design purpose makes the set relevant to owners maintaining that sharpener, while the narrow compatibility means it is not a general-purpose belt assortment for other machines.
Alternatives to Work Sharp Belt Kit
Sander Belts alternative

700+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81120 Fine Grit Belt Kit
Choose the assorted kit for variety across a sharpening routine; choose this fine-grit kit if you specifically want several X4 belts and do not need the other grades.
- This kit contains five X4 fine 4-micron Norton Norax belts, listed as P3000 equivalent, measuring 3/4 by 12 inches.
- It is specified for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The assorted kit supplies one belt each at five grits, including X4 fine and grades both coarser and finer.
Sander Belts alternative

500+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81119 Medium Grit Belt Kit
Choose the assortment if you want several grit options together; choose this medium-grit kit if X22 is the grade you use most and you prefer multiple replacements at that grade.
- This kit contains five X22 medium 22-micron Norton Norax belts, listed as P1000 equivalent, measuring 3/4 by 12 inches.
- It is specified for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The assorted kit provides one X22 medium belt alongside four other grades, including coarse and finer options.
Is Work Sharp Belt Kit Worth It?
The Work Sharp WSSAKO81113 Assorted Belt Kit is worth considering for Ken Onion Edition WSKTS-KO owners who want a varied set of replacement abrasives.
Its five-grit range is the main benefit, spanning coarse grinding through an extra fine Micro-Mesh option.
Buy it when variety matters more than having several belts of one grit, and confirm the model and belt widths first. Owners of other Work Sharp tools should look for a replacement set explicitly made for their model.
Your review at a glance

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A varied replacement belt set for Ken Onion Edition sharpener owners who want coarse grinding, finer sharpening, and an extra fine finishing option.
- Includes one P120 extra coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra fine Micro-Mesh belt.
- X65 coarse is listed as equivalent to P220; X22 medium is P1000 equivalent; X4 fine is P3000 equivalent.
- The P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra fine Micro-Mesh belt measures 1/2 by 12 inches.