The SmallRig Super Clamp review centers on a compact clamp for adding a mounting point to suitable bars, shelves, and other supports.
Its adjustable jaw and 1/4-inch and 3/8-inch threaded holes make it most useful for camera builders who already have compatible accessories.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A practical fit for creators who need to attach a lightweight camera accessory to a narrow bar, shelf, or other support.
- Adjustable jaw opens to about 40 mm and has a stated minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp sections are intended to reduce slipping and scratching.
Pros
- Combines 1/4-inch and 3/8-inch threads in one clamp.
- Jaw range gives a clear way to check whether a support is likely to fit.
Consider before buying
- The 15–40 mm jaw range rules out supports outside that thickness window.
- Only the clamp is included, so a ball head or arm may be needed to position an accessory.
Read the full review summary
This clamp combines an adjustable jaw with two common thread sizes, so it can hold a compatible accessory directly or serve as an attachment point for another mounting part.
Rubber pads are intended to help limit slipping and surface scratches, while the aluminum alloy and stainless steel construction suits a reusable rig component.
The key fit check is the support’s thickness: the jaw opens to about 40 mm and has a stated minimum of 15 mm.
The product is a single clamp, so buyers who need an articulating arm, ball head, or device-specific holder should account for that additional hardware separately.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The jaw can attach to a range of support types, and the two thread sizes broaden accessory options.
Jaw range
The stated 15–40 mm range covers many compact bars and edges, but requires a fit check before purchase.
Accessory compatibility
Both 1/4-inch and 3/8-inch threaded holes are useful standards for building out a camera rig.
Surface protection
Rubber pads are designed to reduce slipping and scratching where the clamp contacts a support.
Rig flexibility
It creates a mounting point, but does not include an articulated arm or accessory head.
Portability
At 0.13 kg and described as compact, it is suited to a kit where a small clamp is easier to carry than a larger support.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and has a stated minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp sections are intended to reduce slipping and scratching.
- Designed for mounting on supports such as hooks, shelves, plate glass, and crossbars, as well as other suitable objects.
- The package includes one super clamp; accessories are not listed as included.
- Listed maximum weight recommendation is 3.3 pounds; treat this as a selection limit and consider the full rig and mounting surface.
Pros and Cons of SmallRig Super Clamp
Pros
- Combines 1/4-inch and 3/8-inch threads in one clamp.
- Jaw range gives a clear way to check whether a support is likely to fit.
- Rubber contact pads are designed to help protect the mounting surface and improve grip.
- Aluminum alloy and stainless steel construction keeps the clamp relatively light at 0.13 kg.
Consider before buying
- The 15–40 mm jaw range rules out supports outside that thickness window.
- Only the clamp is included, so a ball head or arm may be needed to position an accessory.
- Its listed maximum weight recommendation is 3.3 pounds, so heavier assemblies are outside the stated guidance.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider this clamp if your setup needs a compact way to attach a camera accessory to a support that measures between 15 and 40 mm thick.
The 1/4-inch and 3/8-inch threads make it adaptable to compatible parts, while the padded contact points suit installations where protecting the support matters.
It is especially practical for a modular rig: use the clamp as the anchor, then add a compatible ball head or arm if the accessory needs angle adjustment.
Before ordering, check the support diameter or thickness, confirm the accessory’s thread, and keep the complete mounted setup within the stated weight recommendation.
Who should skip it
Skip it if your support is thinner than 15 mm or thicker than about 40 mm, or if your setup needs an included articulated arm and ready-to-use positioning hardware.
For a heavier or moving rig, check the full assembly weight and mounting conditions carefully; the clamp’s listed maximum recommendation is 3.3 pounds.
How the SmallRig Super Clamp Fits a Camera Rig
Check the jaw before planning the mount
The 15–40 mm jaw range is the first practical constraint.
Measure the bar, shelf edge, or other support at the exact point where the clamp will sit, since a close fit determines whether this model can serve as the anchor for the rest of the rig.
Thread options simplify accessory matching
Having both 1/4-inch and 3/8-inch threaded holes offers two common connection points for compatible camera accessories. Confirm which thread your accessory uses and whether it needs a separate adapter or positioning component before building around the clamp.
Pads and materials suit repeat setup changes
The aluminum alloy and stainless steel body is paired with rubber pads at the contact areas.
That combination is intended for a durable, reusable mount while helping limit movement and surface marks; clean contact surfaces and secure the clamp carefully each time you reposition it.
Plan for the whole assembly
The listed maximum weight recommendation is 3.3 pounds, so account for the accessory and any attached arm or adapter together.
That figure does not establish how a particular support will behave, making the support’s shape and stability part of the buyer’s fit check.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose this alternative if you want a clamp with a built-in articulated connection and action camera adapter.
Choose the reviewed clamp if its 1/4-inch and 3/8-inch threaded holes and 15–40 mm jaw range better match the support and accessories you already own.
- This clamp mount includes a double ball head, a 1/4-inch screw, and an action camera mount adapter; its stated weight capacity is up to 1.5 kg.
- The SmallRig Super Clamp provides a clamp and threaded holes, while the product data does not list a ball head or action camera adapter as included.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the kit if you need an included arm and a wider maximum jaw opening.
The reviewed clamp is a more direct option when its 15–40 mm fit and threaded attachment points suit your support and you prefer to select positioning hardware separately.
- This kit pairs a clamp with a 9.8-inch articulating arm featuring double 360-degree ball heads and 1/4-inch screws; its clamp opens to a maximum of 54 mm.
- The SmallRig Super Clamp is a standalone clamp, so an arm for positioning an accessory would need to be sourced separately.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering as a compact, reusable mounting anchor for compatible camera accessories. Its two thread sizes, padded jaws, and aluminum alloy and stainless steel construction give it useful flexibility for a modular rig.
Buy it when your support measures within the 15–40 mm jaw range and the mounted assembly fits the 3.3-pound maximum recommendation.
If you need an arm or ball head in the same package, select a kit that includes that positioning hardware.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A practical fit for creators who need to attach a lightweight camera accessory to a narrow bar, shelf, or other support.
- Adjustable jaw opens to about 40 mm and has a stated minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp sections are intended to reduce slipping and scratching.