The SmallRig 1138 camera clamp review centers on a compact mounting kit for creators who want to attach a camera or accessory to nearby supports.
Its double ball head, 1/4-20 screw, and included action camera adapter offer flexible positioning, with a stated load limit of up to 1.5 kg.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Clamp
A fit for creators who need to secure a lightweight camera or accessory to a rod, tube, table, frame, or tripod without drilling.
- Clamps to a rod, tube, table, frame, or tripod, with no drilling required.
- Uses a double ball head and 1/4-20 screw to position and attach compatible gear.
- Includes an action camera mount adapter alongside the super clamp.
- Made from aluminum and stainless steel.
Pros
- Combines a clamp and adjustable dual ball head in a compact mounting unit.
- Fits several kinds of supports, including tables, rods, tubes, frames, and tripods.
Consider before buying
- The up-to-1.5 kg capacity makes this a better fit for lightweight accessories than heavier equipment.
- The exact jaw opening is not specified, so measure your intended support before buying.
Read the full review summary
The SmallRig 1138 combines a clamp, dual ball head, and 1/4-20 screw in a small assembly made from aluminum and stainless steel.
It is designed to fasten to rods, tubes, tables, frames, or tripods, letting you position compatible cameras, lights, microphones, webcams, or monitors without drilling. The action camera adapter broadens the ways it can connect to a small rig.
This setup suits creators who need a compact mount for a lightweight accessory in a desk, vehicle, or other supported shooting environment.
Its 0.2 kg listed weight and 3.74 × 3.35 × 0.98 inch dimensions suggest a portable piece of kit, though the exact clamp opening is not specified.
Check that your support surface and accessory connection fit, and keep the combined load within the stated 1.5 kg maximum.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is designed for rods, tubes, tables, frames, and tripods, while its 1/4-20 screw accommodates a range of compatible gear.
Angle adjustment
The dual ball head is intended to let users position attached equipment; the description does not give a specific adjustment range.
Accessory compatibility
The screw and included action camera adapter support several types of camera and production accessories.
Load guidance
A clear maximum of up to 1.5 kg helps buyers assess fit, although the actual usable load depends on the setup and movement.
Construction
Aluminum and stainless steel construction is a practical choice for a reusable mounting accessory.
Portability
At 0.2 kg and listed dimensions of 3.74 × 3.35 × 0.98 inches, it is compact relative to a larger support rig.
Key Features and Specifications of SmallRig 1138 Clamp
- Clamps to a rod, tube, table, frame, or tripod, with no drilling required.
- Uses a double ball head and 1/4-20 screw to position and attach compatible gear.
- Includes an action camera mount adapter alongside the super clamp.
- Made from aluminum and stainless steel.
- Supports a maximum load of up to 1.5 kg.
- Measures 3.74 × 3.35 × 0.98 inches and weighs 0.2 kg.
- The manufacturer recommends attaching a safety rope in dynamic scenarios.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a clamp and adjustable dual ball head in a compact mounting unit.
- Fits several kinds of supports, including tables, rods, tubes, frames, and tripods.
- The 1/4-20 screw and included action camera adapter allow multiple connection approaches.
- Aluminum and stainless steel construction keeps the design relatively lightweight.
Consider before buying
- The up-to-1.5 kg capacity makes this a better fit for lightweight accessories than heavier equipment.
- The exact jaw opening is not specified, so measure your intended support before buying.
- For moving or dynamic setups, the manufacturer advises using a safety rope, adding another piece of rigging to plan for.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if you need a compact way to mount a small camera, action camera, microphone, light, webcam, or monitor to a nearby support.
The range of listed mounting surfaces makes it potentially useful at a desk or in a vehicle, provided the surface suits the clamp and the full accessory setup stays within the stated load limit.
It is also worth considering when you want an integrated clamp and ball-head arrangement rather than assembling those mounting pieces separately.
Before committing, confirm the support dimensions and the accessory’s connection point, and use the recommended safety rope if the setup will move.
Who should skip it
Look for another mounting approach if your planned camera and accessories together exceed 1.5 kg, or if your support’s diameter or thickness cannot be confirmed to fit the clamp.
This may not suit a setup that must remain secured during movement unless you can attach the recommended safety rope and verify the full rig is appropriate for that use.
How the SmallRig 1138 Clamp Fits a Camera Rig
Check the support before planning a setup
The clamp is described for rods, tubes, tables, frames, and tripods, giving it a range of potential anchor points.
Because no jaw-opening measurement is provided, check the size and shape of your chosen support before relying on a particular placement.
Treat the load limit as a complete-rig ceiling
The maximum capacity is up to 1.5 kg.
Count the attached camera or accessory and any relevant mounting pieces together, and allow for the fact that movement can make a rig harder to manage than a stationary desk setup.
Use the ball head for practical positioning
The dual ball head is intended to help orient attached equipment after clamping.
That makes the design useful when a fixed support point is available but the accessory needs a different angle; confirm the final position stays secure before operating the camera or light.
Plan for moving environments
SmallRig specifically recommends attaching a safety rope in dynamic scenarios to help prevent a device drop. If you expect vibration or movement, consider where the rope can connect and whether the support point remains suitable throughout the shot.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 when you want a compact clamp and dual ball head with an action camera adapter.
Consider the 2732 if you need a longer articulating arm, a specified clamp-opening range, or both 1/4-inch and 3/8-inch clamp threads.
- The 2732 kit includes a 9.8-inch articulating arm with 1/4-inch screws at both ends and a clamp with 1/4-inch and 3/8-inch threads.
- Its clamp opens from 15 mm to 54 mm, and the clamp and arm have rubber cushions.
- The SmallRig 1138 combines a clamp with a double ball head and includes an action camera adapter; its stated maximum load is up to 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 4103 may be a better fit when a two-point clamp arrangement, a specified rod range, or a higher stated load limit matters.
The 1138 is the simpler choice for buyers seeking one compact clamp with an action camera adapter and a lower load ceiling.
- The 4103 uses two clamps and a 360-degree rotating double ball head, with a stated maximum load of 3.5 kg.
- Its clamps are described for rods from 14 mm to 60 mm in diameter.
- The 1138 is a single super clamp setup with a stated maximum load of up to 1.5 kg and an included action camera adapter.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for creators who need a compact clamp-and-ball-head mount for lightweight gear on a suitable rod, tube, table, frame, or tripod.
Its 1/4-20 connection and included action camera adapter add useful flexibility without requiring a larger rig.
Check the support fit and the total mounted load before choosing it, and stay within the up-to-1.5 kg limit.
For any moving setup, plan to use the recommended safety rope; buyers with heavier gear or a need for a longer arm should compare other mounting designs.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Clamp
A fit for creators who need to secure a lightweight camera or accessory to a rod, tube, table, frame, or tripod without drilling.
- Clamps to a rod, tube, table, frame, or tripod, with no drilling required.
- Uses a double ball head and 1/4-20 screw to position and attach compatible gear.
- Includes an action camera mount adapter alongside the super clamp.
- Made from aluminum and stainless steel.